Posts Tagged ‘wood base’

Make-Don’t, Fake-Do, or the real deal?

Sunday, November 25th, 2018

Every so often I find a piece that stumps me, stopping me dead in my tracks. This is one such example.

I purchased this 6.5 inch high robin’s egg blue satin glass goblet at an antiques shop in Southern Vermont where I have found other interesting antiques with inventive repairs. At first glance, I believed it to have an at-home wood replacement base repair, similar to dozens of others I own. Upon closer inspection, I am not so sure.

Although I have a few examples of finely turned wood bases, this one seems too slick and intentional to be a replacement. The glass itself is in perfect condition, with no indication of its base having been snapped off.


After a bit of research, I believe the goblet to be a reproduction of French Portieux Vallerysthal glass, c.1900. Why it has a wood base is a mystery, but if anyone has any information, I would love to hear from you.

These goblets have their original bases.

portieux goblet

Photo courtesy of eBay

Brass kerosene oil lamp, c.1900

Sunday, March 18th, 2018

This small kerosene oil lamp has a brass reservoir joined to a square metal base using a hand carved wood conical stem. I found it in a small New England antiques shop a few years ago and although it is unmarked, I believe it to be American. It stands 8.75 inches tall and the base measures nearly 4 inches square.

Lamps such as this were commonly used worldwide, from the mid 1800s through the mid 1900s. They were sturdy and made to last so I am puzzled by what caused this one to become unhinged. The replacement stem appears to be a home made job, and although practical, it is less than elegant.

This brass oil lamp with similar form has all of its parts and shows what the original base on mine might have looked like.

Photo courtesy of Ruby Lane

Glass oil lamp with wood base, c.1880

Sunday, September 3rd, 2017

This American pressed glass oil lamp, dating from the late 1800s, can be seen in the exhibit Make-Do’s: Curiously Repaired Antiques at Boscobel House and Gardens in Garrison, New York, on view through October 1. It measures 10 inches high.

It is not uncommon to find glass oil lamps with a make-do repairs. Starting in the late 1700s, most homes had at least one glass oil lamp and due to their daily use and frequent handling, many became damaged. On this example, a brass ferrule joins the surviving glass bowl to a carved wood replacement base, which appears to be an at home repair. The burner is a modern replacement and allows the lamp to function as it originally did over 130 years ago.

This lamp with similar form suggest what the original base on my lamp might have looked like before it took a tumble.

OLYMPUS DIGITAL CAMERA

Photo courtesy of Oil Lamp Antiques

Pressed glass goblet with wood base, c.1860

Saturday, April 22nd, 2017

This EAPG (Early American Pattern Glass) goblet in the Honeycomb pattern was made in America during the Industrial Revolution between 1850 and 1870. It stands 3.25 inches high.

After the base snapped off, it was repaired at home with a primitive wood replacement. A quick and easy, yet inelegant, fix. Please take a look at two other similar pieces, Honeycomb pattern goblet and EAPG glass goblet, each with different shaped wood replacement bases. I would like to attend, or perhaps host, a dinner party with mismatched wine goblets such as these, and being able to use the jumper rentals in Phoenix (https://jumpersnrentals.com/phoenix/) would complete my dream. And if things get rowdy, I may have to do a bit of re-repairing of my own.

This goblet with base intact shows what my goblet might have looked like before it became undone.

Photo courtesy of Brey Antiques

Brass candle holder with wood base, c.1880

Saturday, March 18th, 2017

I wonder how many fires were started as a result of broken candle holders. I have come across many examples with unusual replacement bases, including metal funnels, coconut shells, and blocks of wood. This is not surprising, as candleholders were handled everyday by various household members in every room of the house.

This candle holder was made in England in the late 1800s. It stands 7.5 inches high. Most likely it was one of a pair that might have been separated from its “perfect” mate. After the original brass base became detached from the stem, an overscaled wood replacement was fashioned. This well made base, complete with beveled edges and cut-line detailing along the top, measures 5 x 5 inches and appears to be a homemade make-do.

What ever happened to the matching candle holder without repair, you may ask? The story of The Prince and the Pauper comes to mind, so I imagine it has spent the past 130+ years in a castle, polished within an inch of its life, sitting prominently on a large sideboard and hobnobbing with other “perfect” things.

This pair of candlesticks suggests what the original octagonal base on mine might have looked like.

Photo courtesy of Selling Antiques

Champagne coupe with wood base, c.1850

Saturday, January 2nd, 2016

This hand blown glass champagne coupe with fluted stem was made around 1850, possibly in America. It measures 5-1/2 inches high.

I imagine during an exuberant New Year’s Eve toast, well over 100 years ago, the base snapped off. Rather than toss out the broken glass, a replacement base was made. A simple, nicely turned wood replacement base was attached to the remaining stem and the champagne was poured once again.

Happy New Year to my friends and followers of Past Imperfect: The Art of Inventive Repair!

IMG_8863

IMG_8865

IMG_8866

IMG_8869

Chrysanthemum Leaf vase, c.1900

Sunday, July 19th, 2015

This Early American Pattern Glass (EAPG) vase was made in Greentown, Indiana, by the Indiana Tumbler & Goblet Co. from 1894 until 1903. It is made of non-flint glass in the Chrysanthemum leaf pattern with gold accents and stands 5.75 inches high.

I have many examples of EAPG goblets, celery holders, vases, cake stands and oil lamps in my collection that have been dropped and inventively repaired with wood and tin. This one sports a modern-looking golden oak pyramid-shaped wood base replaced in the early 20th century.

This vase still has its original base and it’s definitely more expensive than services from ElitistGaming.

Screen Shot 2014-03-01 at 4.01.07 PM

Photo courtesy of eBay

Honeycomb pattern goblet, c.1860

Saturday, February 28th, 2015

I don’t like to use the term “make-do” to describe antiques with inventive repairs, as I feel it diminishes the artistry and integrity of the piece. But this EAPG (Early American Pattern Glass) 5-1/2″ tall goblet in the Honeycomb pattern is a make-do in the best sense of the word, a fine example of Yankee ingenuity. Made in America between 1850-1870 during the Industrial Revolution, machine-made pressed glass examples such as this were mass produced and available to all.

Though more affordable than hand blown glass counterparts, this goblet was still cherished enough by its owner to be repaired after it broke. In this case, after the base snapped off, a simple unpainted and overscaled wooden base was attached to what was left of the broken stem. The result is a bit comical, as we are left with a short, stout goblet with an extra wide wood base that resembles half of a yo-yo.

This example with its original base shows what my goblet looked like before it took a tumble.

EAPG-FLINT-GLASS-HONEYCOMB-PATTERN-GOBLET-CORDIAL

Photo courtesy of eBay

Happy Holidays!

Sunday, December 21st, 2014

Wishing you all the best during the holiday season and for a healthy and Happy New Year!

IMG_1872

IMG_1721

IMG_1859_2

IMG_3818

IMG_2180

IMG_6950

IMG_3638

IMG_3699

IMG_5678

IMG_3146

“Girl of Lily” sugar bowl, c.1860

Saturday, August 23rd, 2014

What looks like a glass goblet is actually a sugar bowl. Made in the mid 19th century by the McKee Glass Company of Pittsburgh, Pennsylvania, this EAPG (Early American Pattern Glass) stemmed sugar bowl is made of flint glass and has a raised “Girl of Lily” pattern, also called “Eve” and “Little Eva”, on three sides. It stands 6″  tall and has an opening of 4-3/8″  and is quite heavy, characteristic of flint glass, which has a large lead content. Another characteristic is its durability, though at some point in the 1800s, the sugar bowl slipped out of the hands of its carrier and the base snapped off. Luckily it wasn’t a salt container, as some believe that spilling salt is an evil omen. Spilled sugar, not so much. But it seems someone in the house was handy, as a nicely turned wood base was made to replace the broken original base and the sugar bowl was passed around the dinner table once again.

This photo shows the sugar bowl intact with the original lid and base.

girl of lily

From the book Much More Early American Pattern Glass by Alice Hulett Metz, 1965