Posts Tagged ‘metal handle’

White ironstone water jug, c.1870

Saturday, October 27th, 2012

Not much is known about this large white ironstone water jug with impressed basket weave design and pearlware glaze. It was found at a bottle dig site in Harper’s Ferry, NY, and remarkably, the tin handle, buried in the ground for dozens of years, remained mostly intact. The neck and spout of the jug were not so lucky, as much has broken off, revealing an asymmetrical jagged edge. This scrappy jug was made in England in the mid to late 19th century, and measures 9-1/4″ hight to top of handle and is 7-1/2″ at its widest point.

This intact jug shows what the original handle and top edge of my jug would have looked like before the tumble.

Photo courtesy of One Kings Lane

Small copper lustre gravelware jug, c.1840

Saturday, September 22nd, 2012

A tiny copper lustre jug, made in England in the mid-19th century, has an applied decorative gravel band at the bottom. It measures just 2-3/4″ tall.

In America, lustreware became popular in mid-19th century. During the Victorian period, a certain dinner party fad was to place lustreware pieces on a mirrored platform as a table centerpiece and watch the glow of gaslight sparkle and shimmer.

Over 100 years ago, a tinsmith made a sturdy replacement handle with two support straps after the original handle broke off. I particularly like the elegant loop the handle makes at the peak, avoiding the remaining broken fragment of the original.

This jug, with similar form and decoration, shows what the simple handle on my perfectly imperfect jug would have looked like before its disfiguring accident.

Photo courtesy of best military watch

 

Nanking sauceboat with multiple repairs, c.1750

Saturday, September 1st, 2012

I have often expressed that I am a sucker for pieces containing more than one form of early repair and this little beauty does not disappoint, as it sports three separate repairs and a signature to boot. Chinese porcelain sauceboat, made for export in the mid-1700s, was originally part of a large dinner set consisting of up to dozens of place settings and serving pieces, including a matching pair of sauceboats. Painted with cobalt blue underglaze in the Nanking pattern, it measures 7-3/4″ long from end to end and is 4-1/4″ deep.

Repair #1: Metal replacement handle, which may have once been covered in woven reed, was riveted to the end of the sauceboat, echoing the loop form of the original.

Repair #2: After the sauceboat was dropped a second time, an eighteenth century china mender carefully applied six 1/2″ staples to adhere the two large broken pieces near the spout.

Repair #3: Three tiny 1/4″ metal staples affix another large piece which broke off at the end of the sauceboat. They were overpainted in blue to match the decoration and over one hundred years later have held up quite well.

Etched on the bottom is “Cove 835”, which I am assuming is the mark of the china mender or tinker who was responsible for one or more of the repairs. I have not been able to find out any information on this cryptic signature but will continue to search and I welcome information anyone can provide.

This porcelain sauce boat from the same period shows what the simple loop handle on my piece would have looked like, before the addition of the metal replacement handle.

Photo courtesy of Ruby Lane

Teapot with kingfisher decoration, c.1750

Saturday, August 4th, 2012

Chinese globular form porcelain teapot with underglaze decoration featuring a kingfisher and pink peonies in the famille rose palette. This popular form was made for export to North America and Europe in the mid 1700s.

Teapot measures 5-1/2″ high and 7-3/4″ wide, from tip of spout to end of handle.

After the original porcelain loop handle broke off, a tinker formed a replacement using bronze covered in woven rattan. I have many examples of wrapped handles on teapots, each with slight variations. I am researching the different decorative patterns used and hope to identify the distinctions unique to each maker.

This globular teapot from the same period shows what the handle on my piece would have looked like before it broke off.

Photo courtesy of LiveAuctioneers

Mini Sunderland jug with EHFDR, c.1850

Saturday, July 21st, 2012

I recently found a third example of a damaged piece repaired with an EHFDR (Emergency Handle for Domestic Receptacles). This little pottery “Dutch’ shape jug, with orange lustre and transfer decoration of a sailing ship, stands just 3-3/4″ high and is 4-3/4” wide. It was made in Sunderland, England, in the middle of the 19th century. The mass-produced replacement handle was added sometime after 1922.

Please take a look at a previous post showing 2 other completely different drinking vessels with the same commercially made patented replacement handles.

The simple loop handle on this intact jug shows what the handle on my jug would have looked like, before the metal replacement was added.

Photo courtesy of Penrith Farmers’ Auction

Coalport cup with birds, c.1830

Sunday, June 10th, 2012

London shape porcelain cabinet cup, made by Coalport in the early to mid 1800s. The Coalport factory was founded by John Rose in 1795 in Shropshire, a county in the West Midlands region of England. This example is superbly painted with angry looking birds & insects in panels surrounded by ornate gilt scrollwork and a cobalt blue ground. Measures 2-1/2″ high. Delicately formed bronze handle replaces the long lost broken original which had the same simple loop shape.

Georgian pearlware teapot, c.1820

Saturday, April 21st, 2012

English pearlware pottery cottage-form teapot with puce transfer decoration of a girl sitting on a richly upholstered chair in a pastoral setting and holding a bird. Teapot is unmarked but was most likely made in Staffordshire during the Georgian era, in the first quarter of the nineteenth century.

Both sides of the teapot have the same decoration.

Teapot measures 10-3/4″ from handle to spout and is 5-1/2″ high.

A replacement handle made of solid pewter incorporates the top remaining handle fragment and has a nice heart-shaped plate at the bottom.

The lid also has an inventive repair, with a copper bolt reattaching the broken knob.

Sauceboat with remarkable silver handle, c.1750

Saturday, March 31st, 2012

This large porcelain sauceboat was made and decorated in China and dates from the Qianlong period (1736-1795). Sauceboats (aka gravy boats) were part of larger dinner services, exported to North America and Europe and snatched up by wealthy customers eager to display in their china cabinets.

A skillful hand decorated the gravy boat with polychrome enamel flowers and an iron red border with gilt detailing.

Even the interior is painted with peony flowers and a blue zig zag fence, visible once the last bit of gravy has been consumed.

The broken handle has been replaced with an ingenious solid silver removable replacement, held together with screws and hinges. The craftsmanship is superb and unlike any other I have seen.

Only the wealthy would have able to afford this type of intricate repair, which keeps the body intact and without the intrusion of piercing rivets and bolts.

Sauceboat measures 4-1/2″ high and is 9-1/2″ long.

This shows what the simple loop handle on my similarly shaped sauceboat may have looked like before it broke off.

Photo courtesy of Guest & Gray

Child’s pearlware teapot, c.1790

Wednesday, February 8th, 2012

Miniature pearlware pottery child’s teapot made in England in the late 1700’s. With cobalt blue underglazed Chinese House (aka Pagoda and Fence) decoration, derived from English Chinoiserie pieces rather than actual Chinese ornamentation.

I am surprised I have not come across more examples of miniatures and children’s items with inventive repairs, as I would imagine that slippery little fingers would surely have caused many a fragile toy to break. I just hope the children who damaged these items were not punished too severely.

Teapot measures 2-1/2″ high and was most likely made in Staffordshire between the years 1780 and 1800.

The simple loop handle which broke off over one hundred years ago, was replaced with a sturdy tin replacement with crimped edges and an upper support band by an itinerant tinsmith, look at the wild thing review. The top portion of the original handle was not ground down and still remains.

Provenance sticker: Roger Bacon Collection, Skinner auction Sept. 23-24, 1982.

This similarly shaped and decorated child’s teapot of the same size still has its original handle and an intact lid.

Photo courtesy of Pinterest

Floral pearlware cream jug, c.1800

Monday, January 2nd, 2012

Lightweight, soft paste pottery cream jug with fluted body, made in England, possibly by Lowestoft. Boldly decorated with hand painted pink flowers and diaper decoration on the inner rim.

Jug was made at the turn of the 19th century and measures 2-1/2″ tall by 4-1/2″ long.

Metal handle with thumb rest and finger grip replaces the original handle and was most likely made by an itinerant tinsmith.

One of 2 rivets which holds the tin handle firmly in place can be seen on the inside of the jug.

This nearly identical cream jug still has its original loop handle.

Photo courtesy of eBay